wireless, Change Outgoing COM port setting

1. Motorola Q - Setting Outgoing COM Port

2. WM10 Network Setting for Port cannot be changed once set

3. bluetooth XP SP2 Cannot Set BT COM port

Hello
I have recently updated my XP with Service Pack 2. After reinializing I have 
can not change Active Sync Connection. I want that Async should communcate 
with a specific Bluetooth comport.  The connection manager of ASync only 
shows standard COM ports (e.g. 1 and 3) which all are configured com ports 
of my laptop, but not the incomming ports from the PDA. I can see them in 
Device Manager, etc.

Before SP2 I had a little of that problem, but that time I could unpair the 
device and then repair it. After the work the connection mananger was able 
to see the new configured comport.
N.B. Something goes unexpectabley when I try to establish a Async link from 
the PDA. The software seems to work properly to establish a connection. The 
messages tells about a success and I have a established connection, which I 
can monitor.  It seems that it found a old uninstalled comport or something 
in the "behind". Hardware only tells me about the 4 I have created.


Using widcomm software and DLINK DBT-120 USB Bluetooth adapter.

my PDA is working perfectly against another computer  (W2K pro).

Roland 

4. Where do I Change the Com port from com1 default to com5 default - ActiveSync (Pocket PC)

5. can not synchronized: BT COM ports not listed in Connection Settings

I can't get ActiveSync (3.7.1 on WinXP SP2+) to synchronize with my PPC 
(HP hx4700 WM2003 / firmware V1.10) via Bluetooth.

The MS Bluetooth setup lists COM ports as follows:
------------
COM5    Outgoing    My PPC 'Bluetooth Serial Port'
COM6    Incoming    My PPC
... <more COM ports here...>
------------

ActiveSync => File => Connection Settings => "Allow serial cable or 
infrared connection to this COM port" lists only
------------
COM1
COM3
COM9
Infrared Port (IR)
------------

How can I force COM5 and/or COM6 to appear in this list???

Michael

6. Programmatically change Bluetooth virtual com port? - Pocketpc Developer

7. Setting COM port FIFO size

I have an application acquiring and storing information through the 
RS-232 port on a Pocket PC device from another device.  I've 
initially developed the application on an older iPAQ 2210 Pocket PC 
2003 device, but now I'm using iPAQ 2490 Windows Mobile 2005 device 
and I'm getting problem of loosing characters.  Initially I thought 
the newer OS version could be the cause but then I've tried I have 
no problem with another (Trimble Recon) device running Widnows 
Mobile 2005.

My application sets up the COM port to use no handshaking as the 
other device doesn't use handshaking and I'm wondering whether the 
problem could be related to a different default FIFO size of the 
UART used.  Is there a way to set the FIFO size of the COM port?

-- 
Stanimir <stanio(_at_)gbg.bg>

8. How to Change the PPC Terminal Services Client Port via a Registry setting - Pocket PC