1. Can't sync even though i am connected using active sync ver3.7.1 with Ipaq4150
On my new Ipaq bought yesterday everything was fine including syncing with USB and IR - even after I upgraded to Active sync 3.7.1 . I tried to install several programs at the same time (Adobe reader etc)- the programs did not get installed since it said that the pocket PC should have been connected during installation which it wasn't. However , now I can connect(and even explore the PocketPc from the PC) but it just doesn't sync and the message on the Ipaq4150 just refers to the last sync. I tried a) system restore in case of a problematic other program b) the advice regarding regsvr32 dll's c) soft resets d) removing network connection in options and several reboots of the PC. Basically clicking on wcesmgr.exe doesn't result in anything. I'm also worried about reinstalling Activesync after removing it since there was a strong HP warning on the new hardware saying i may never be able to sync if i connect with the PC prior to installation of active sync (which i didn't do the first time and it worked fine - but how will the subsequent removal and reinstallation be treated is unknown to me).Please help as I have spent a bomb on the 4150 and already stuck on day two of its ownership.Many thanks in advance.
2. I am using GPS device but not sure how to access it using c sharp - Pocketpc Developer
Is there a way to VPN to my office while connected to a wireless network? Here's the details: I'm using a Dell Axim X5 with Pocket PC 2003. I set up my work settings to use a vpn and two home settings, 1 to use wireless and 1 to use a modem. As long as the modem is plugged in I have the option of using VPN, once I pull it out and put in my wireless card I no longer have the VPN option. Even if I go to the connections and tap and hold on the VPN and then tap connect it doesn't work.
4. VPN through a wireless connection - Pocket PC
5. Wireless VPN ActiveSync Synchronization Guest Connection Problems on PPC 2003
I've been reading through all the applicable newsgroups (microsoft.public.pocketpc, and the wireless and activesync sub-groups) and have discovered that I'm not the only one to have problems synchronizing wirelessly via VPN and ActiveSycn and only getting connected as a guest (where when I sync via IR or USB it works fine). From some troubleshooting steps, I've determined that (for me at least) it seems to be the hosts file (whether this information is input directly into the registry or via Pocket Hosts) that is causing the problem. I am able to connect via VPN whether I'm on my internal firewalled router network or off this network (I forwarded port 1723 to the computer I have set up to accept VPN connections...which is different now than the computer I am attempting to ActiveSync with). When I'm within my network and establish a VPN connecton, and there is no entries in Pocket Hosts, ActiveSync works fine (since I could normally ping computers by name without a hosts file within my network). When I'm outside my network and there are no entires in Pocket Hosts and I establish a VPN connection, but there are no entries in Pocket Hosts, no ActiveSync connection is made (I'm assuming since the Pocket PC can't see the named computer) When I'm inside or outside my network and there is an entry in Pocket Hosts that links the private IP address of the ActiveSync machine to that computer's name and I establish a VPN connection, ActiveSync only connects as a guest. This is driving me absolutely crazy and it would seem there is some flaws in ActiveSync. Has anyone spoken to Microsoft about this? Anyone have any other ideas that I may try to resolve this problem? Also, for some odd reason, when I VPN in from outside my network, I can ping all my internal network machines (and if there's a Pocket Hosts entry I can even ping my ActiveSync machine by name), but can't connect to shares via File Explorer (even though I should be able to). Any ideas about this?? Any help is greatly appreciated!! Thanks! Marc
6. Wireless VPN ActiveSync Synchronization Guest Connection Problems on PPC 2003/iPaq h5555 - Pocket PC
7. Wireless VPN draytek connection
I use a wireless connection from my DELL X5 to my access point. Works very well, fast ping results. But behind this access point stands a firewall with a VPN server (Draytek). By this way nobody can access the network behind this firewall, even if they get onto the wireless net. But the Pocket 2003 standard VPN client can not connect to the VPN server. On a wireless tablet PC you have to switch off the option 'Require data encryption' to use the standard VPN client of Windows. I think I have to set this one also of on the Pocket 2003. But where can I find this option? Or may be somebody has had the same problem and fixed it with another setting. Somebody has answers?
8. Authenticating an VPN connection using a RSA Securid Hardtoken in WM2003 - Pocket PC