1. Change Outgoing COM port setting
2. bluetooth XP SP2 Cannot Set BT COM port
Hello I have recently updated my XP with Service Pack 2. After reinializing I have can not change Active Sync Connection. I want that Async should communcate with a specific Bluetooth comport. The connection manager of ASync only shows standard COM ports (e.g. 1 and 3) which all are configured com ports of my laptop, but not the incomming ports from the PDA. I can see them in Device Manager, etc. Before SP2 I had a little of that problem, but that time I could unpair the device and then repair it. After the work the connection mananger was able to see the new configured comport. N.B. Something goes unexpectabley when I try to establish a Async link from the PDA. The software seems to work properly to establish a connection. The messages tells about a success and I have a established connection, which I can monitor. It seems that it found a old uninstalled comport or something in the "behind". Hardware only tells me about the 4 I have created. Using widcomm software and DLINK DBT-120 USB Bluetooth adapter. my PDA is working perfectly against another computer (W2K pro). Roland
3. can not synchronized: BT COM ports not listed in Connection Settings - ActiveSync (Pocket PC)
I have an application acquiring and storing information through the RS-232 port on a Pocket PC device from another device. I've initially developed the application on an older iPAQ 2210 Pocket PC 2003 device, but now I'm using iPAQ 2490 Windows Mobile 2005 device and I'm getting problem of loosing characters. Initially I thought the newer OS version could be the cause but then I've tried I have no problem with another (Trimble Recon) device running Widnows Mobile 2005. My application sets up the COM port to use no handshaking as the other device doesn't use handshaking and I'm wondering whether the problem could be related to a different default FIFO size of the UART used. Is there a way to set the FIFO size of the COM port? -- Stanimir <stanio(_at_)gbg.bg>
5. Use of USB port as virtual serial COM port - Pocketpc Developer
6. No more outgoing or incoming port !
On an HTC TyTNII Kaiser under WM6 Pro SE CE 5.2.1620 (build 18125.0.4.2), after I deleted an unused port (Comm Mgr/Bluetooth param/COM Ports), the "create a new outgoing port" or "an incoming port" also disappeared. How can I restore the ability to configure new COM ports ? Thanks in advance for your help. -- Chlb
7. Outgoing port under bluetooth-devices - Pocket PC
8. Gps configuration problem, - can't create a new outgoing port
Hello, I have a Eten M600 with 225 WWE rom and WM5 installed. I've just bought a bluetooth gps receiver (globalsat BT-338) and i tried to follow the tipical windows mobile 5 steps to connect my m600 with the gps receiver, but when I try to add a "New Outgoing Port" and then select the deveiced paired (the gps receiver), I can't go ahead because the button "next in the lower right corner doesn't work (only the cancel in the lower left corner works and bring me back in the previous screen). Any idea how to solve this problem? Thank you