Pocket PC Networking, About SD card error!!??

microsoft.public.pocketpc.developer.networking - this forum explains how the Pocket PC communicates with the Internet, with other mobile devices, and with networks. It teaches students the basics of Pocket PC telephony, synchronization, and messaging


Pocket PC Networking >> About SD card error!!??

by Jone » Sun, 21 Aug 2005 12:43:19 GMT

Dear All,
Belowing is my SD card driver debug message!
In the last two lines, Showing powerup failed and not responding!
where is wrong?

................................................................................
............................................................................................
>>> Loading module sdbus.dll at address 0x01720000-0x01751000
Loaded symbols for 'E:\WM500\WPC\SDBUS.DLL'
SDBusDriver: PROCESS_ATTACH
SDBusDriver: +SDC_Init
SDBusDriver: Initialize: Using request list depth of 48 entries
SDBusDriver: BusRequestCompleteDispatch Work Item Starting Up
SDBusDriver: Bus Driver instance created : 0x00037B90 ! -SDC_Init
>>> Loading module sdhc_mainstoneii.dll at address 0x01930000-0x01946000
Loaded symbols for 'E:\WM500\WPC\SDHC_MAINSTONEII.DLL'
SDHCDGetHCFunctions: +Init
SDHCDGetHCFunctions: -Init
SDH: +SDH_Init
SDH: Active RegPath: Drivers\Active\13
- LoadPlatformRegistrySettings--------------------
SDH: Real RegPath:
SDBusDriver: Host Controller "Lubbock" assigned number 0
SDBusDriver: SlotStatusChange Work Item Starting Up
====InitializeHardware ENTER ipml.c====
==== InitializeHardware End in ipml.c ====
==================OALIntrEnableIrqs: (i = 0, irq=x00000017)==========
==================OALIntrEnableIrqs: (g_pICReg->icmr=x06800500)==========
-----impl.c- SetupCardDetectIST--------------------
==================OALIntrEnableIrqs: (i = 0, irq=xffffffff)==========
==================OALIntrEnableIrqs: (g_pICReg->icmr=x06800500)==========
SDH: -SDH_Init
>>> Loading module ndis.dll at address 0x02CF0000-0x02D13000 (RW data at
>>> 0x01EC3000-0x01EC3D3D)

=== SDCardDetectIstThread ENTER ===
=== SDCardDetectIstThread: Started ===
==== SDCardDetectIstThread: Card Detect Event occurred ====
<<< Unloading module rndisfn.dll at address 0x01970000-0x01988000
Unloaded symbols for 'E:\WM500\WPC\RNDISFN.DLL'
>>> Loading module rndisfn.dll at address 0x01970000-0x01988000
Loaded symbols for 'E:\WM500\WPC\RNDISFN.DLL'
==== !Pin31 is LOW; T Card In ====
==== SDCardDetectIstThread: Card Inserted ====
CardDetectIstThread: Device Fully Inserted !
SDSetRate - Requested Rate: 100000, Setting clock rate to 312500 Hz (6)
=== SDCardDetectIstThread: Started ===
SDGetClientFunctions: +Init
SDGetClientFunctions: -Init
................................................................

SDHSlotOptionHandler - called - SetSlotInterface : Clock Setting: 100000
SDHSlotOptionHandler - called - SetSlotInterface : setting for 1 bit mode
SDSetRate - Requested Rate: 100000, Setting clock rate to 312500 Hz (6)
SDSetCardInterfaceForSlot - HC ClockRate differs desired setting: desired:
100000 Hz, Actual : 312500 Hz
HandleEndCommandInterrupt: response for command 5 , timed - out
SDBusDriver: Retrying request 0x00038D30 , Current retry count: 3
HandleEndCommandInterrupt: response for command 5 , timed - out
SDBusDriver: Retrying request 0x00038D30 , Current retry count: 2
HandleEndCommandInterrupt: response for command 5 , timed - out
SDBusDriver: Retrying request 0x00038D30 , Current retry count: 1
HandleEndCommandInterrupt: response for command 5 , timed - out
...........................................................................
..............................................................
HandleEndCommandInterrupt: response for command 55 , timed - out
SDBusDriver: Retrying request 0x00038D30 , Current retry count: 3
HandleEndCommandInterrupt: response for command 55 , timed - out
SDBusDriver: Retrying request 0x00038D30 , Current retry count: 3
>>> Loading module dhcp.dll at address 0x03C40000-0x03C4A000 (RW data at
0x01F95000-0x01F951FD)
..................................
SDBusDriver: Device failed to powerup after voltage setting
SDBusDriver: Work Item exiting because of device is not responding
...............................



Top
Similar Threads

1. SD card error !!! Please help 

I have a Kingston 512mb SD card. I have been using this card for some months
to store files and programmes without issue until this week.

Yesterday I tried to access an MP3 file on my pocket PC but it has
disappeared none of my mp3 or wmv files appear.  I checked using the file
explorer and non of my files, folders or programmes appear. Instead there is
a 0kb file which is called "ignore my docs". I deleted this hoping that it
would clear the problem but no luck.

I have tried viewing the files on my desktop using a card reader - again
none of the files appear but my desktop tells me the card has 488mb memory
in use so they must be there right ?

I have run the error check app on the card from my desktop and no problems
are reported. I have also run a virus check and there are no issues.

Can anyone help ?


Thanks

2. SD Card error - Pocket PC

3. SD card ERRORs 

Dear All,
Belowing is my SD card driver debug message!
In the last two lines, Showing powerup failed and not responding!
where is wrong?

................................................................................
............................................................................................
>>> Loading module sdbus.dll at address 0x01720000-0x01751000
Loaded symbols for 'E:\WM500\WPC\SDBUS.DLL'
SDBusDriver: PROCESS_ATTACH
SDBusDriver: +SDC_Init
SDBusDriver: Initialize: Using request list depth of 48 entries
SDBusDriver: BusRequestCompleteDispatch Work Item Starting Up
SDBusDriver: Bus Driver instance created : 0x00037B90 ! -SDC_Init
>>> Loading module sdhc_mainstoneii.dll at address 0x01930000-0x01946000
Loaded symbols for 'E:\WM500\WPC\SDHC_MAINSTONEII.DLL'
SDHCDGetHCFunctions: +Init
SDHCDGetHCFunctions: -Init
 SDH: +SDH_Init
SDH: Active RegPath: Drivers\Active\13
- LoadPlatformRegistrySettings--------------------
 SDH: Real RegPath:
SDBusDriver: Host Controller "Lubbock" assigned number 0
 SDBusDriver: SlotStatusChange Work Item Starting Up
====InitializeHardware ENTER ipml.c====
 ==== InitializeHardware End in ipml.c ====
 ==================OALIntrEnableIrqs: (i = 0, irq=x00000017)==========
==================OALIntrEnableIrqs: (g_pICReg->icmr=x06800500)==========
-----impl.c- SetupCardDetectIST--------------------
==================OALIntrEnableIrqs: (i = 0, irq=xffffffff)==========
==================OALIntrEnableIrqs: (g_pICReg->icmr=x06800500)==========
 SDH: -SDH_Init
>>> Loading module ndis.dll at address 0x02CF0000-0x02D13000 (RW data at 
>>> 0x01EC3000-0x01EC3D3D)

 === SDCardDetectIstThread ENTER ===
 === SDCardDetectIstThread: Started ===
 ==== SDCardDetectIstThread: Card Detect Event occurred ====
 <<< Unloading module rndisfn.dll at address 0x01970000-0x01988000
Unloaded symbols for 'E:\WM500\WPC\RNDISFN.DLL'
 >>> Loading module rndisfn.dll at address 0x01970000-0x01988000
Loaded symbols for 'E:\WM500\WPC\RNDISFN.DLL'
 ==== !Pin31 is LOW; T Card In ====
 ==== SDCardDetectIstThread: Card Inserted ====
 CardDetectIstThread: Device Fully Inserted !
SDSetRate - Requested Rate: 100000, Setting clock rate to 312500 Hz (6)
=== SDCardDetectIstThread: Started ===
SDGetClientFunctions: +Init
SDGetClientFunctions: -Init
................................................................

 SDHSlotOptionHandler - called - SetSlotInterface : Clock Setting: 100000
SDHSlotOptionHandler - called - SetSlotInterface : setting for 1 bit mode
SDSetRate - Requested Rate: 100000, Setting clock rate to 312500 Hz (6)
SDSetCardInterfaceForSlot - HC ClockRate differs desired setting: desired: 
100000 Hz, Actual : 312500 Hz
HandleEndCommandInterrupt: response for command 5 , timed - out
SDBusDriver: Retrying request 0x00038D30 , Current retry count: 3
HandleEndCommandInterrupt: response for command 5 , timed - out
SDBusDriver: Retrying request 0x00038D30 , Current retry count: 2
HandleEndCommandInterrupt: response for command 5 , timed - out
SDBusDriver: Retrying request 0x00038D30 , Current retry count: 1
HandleEndCommandInterrupt: response for command 5 , timed - out
...........................................................................
..............................................................
 HandleEndCommandInterrupt: response for command 55 , timed - out
SDBusDriver: Retrying request 0x00038D30 , Current retry count: 3
HandleEndCommandInterrupt: response for command 55 , timed - out
SDBusDriver: Retrying request 0x00038D30 , Current retry count: 3
>>> Loading module dhcp.dll at address 0x03C40000-0x03C4A000 (RW data at 
>>> 0x01F95000-0x01F951FD)
..................................
SDBusDriver: Device failed to powerup after voltage setting
SDBusDriver: Work Item exiting because of device is not responding
...............................

4. PC Card Expansion Pack and SD Card Adapter - Pocket PC Networking

5. How to copy 256MB SD card to 1GB SD card 

I have a PocketPC device -- a Samsung i700 with a 256 MB SD card on which I
have data files and programs installed. I just bought a 1GB SD card to
replace the 256 MB card I currently use.

I used 2 USB Flash drives attached to a Windows XP Pro desktop to copy the
smaller memory card to the larger (using Windows Explorer). The copy
completes successfully and from my PockePC device I can read the files on
the copied memory card. But, the OS (Windows Mobile 2003) can't launch any
programs that are installed on the new card.

Is there another procedure, program, or customization I need to use to get
this to work correctly?

6. Ghost Files on SD cards (SD Card fills up with ghost files) - Pocketpc Developer

7. C00D11AA error message when copying to SD Card on Pocket PC 2003 

I seem to just remember reading about a problem with doing that, try search 
through the PocketPC Newsgroup or post there for more info.

-- 
NOTE: Replies are to help benefit others in helping
you and reproducing issues, not necessarily for me
to get back to you.
---
"RojoQue" < XXXX@XXXXX.COM > wrote in message 
news: XXXX@XXXXX.COM ...
> Hi,
>
> I bought a few songs from Napster and I tried to copy the songs directly 
> to
> my SD card using WMP 9.0 but I keep getting the C00D11AA error message. 
> The
> transfer works fine if I copy the files directly to the main memory but I
> have limited space there so this is not a good option.
>
> Is there a setting that I am missing?
>
> Thanks,
> Ron

8. Error 31 when trying to format SD card - Pocket PC