nortel >> Route member indication on 2250 console??

by justzikle » Sun, 07 Aug 2005 16:39:46 GMT

Hi all. i m running option 61 c with 2 operator console 2250. I have a
rote RDB=50 with 20 members(COT Lines. Now customer wants that if any
member of this route is busy then it should be sho on console any key
vice versa if all members or some members of this route are busy then
it must be shown on console keys. Can i programme console ICI key for
individual trunk member status??? if yes then how???
another thing is that is it possible to access/pick individual trunk
from console key for dial out like we programmed a hot key on M3904 for
trunk to get access of trunk???
i m stuck at this point is this possible and how???
Can i create a lock code for console like electronic lock for
extensions???(besides disconnecting hand set), customer wants that they
should be able to lock console by some code
take cares and regards


Similar Threads

1. 2250 console display

2. 2250 Console wiring

I have a 2250 console down . It is wired to a 4 pair cable and apparrently 
has worked for several years like this.I have expeirence using 25 pairs and 
x-connecting 5 consecutive tns to the 25
pair.This particular console has apparrently worked for some time as is.This 
one has 4 tns connected to it.
All Nortel documentation states that 5 consecutive pairs are required. This 
one has the first 2 tns unit 0,1 and 3,4 as power.Unit 2 is a 3903.  Old 
console re acts the same connected in equip.There is another console on site 
that appears to work that is wired the same.
Customer is reluctant to allow only other console to be swapped as a test.
Anyone with any help is greatly appreciated.
Thanks in advance.
Al
-- 
A K Communications
PO Box 539
Cloverdale, VA 24077
Office: (540) 966-4233
Fax:(540) 591-9074 


3. ees key on 2250 console

4. 2250 w/ Succession 3.0

Will a 2250 console work on a 81C with Succession 3.0?
Thanks in advance!

5. call forward on 2250

6. CAPI doesn't detect Connect B3 Indication

Hi,

I write one application in Delphi 7. I use CAPI in application, because
I need to handling ISDN card. My problem that CAPI doesn't detect
incoming B3 connection.
My program detecting incoming call and I response on this.
My program detect active connection and I response on this.
In the future only detect info. CAPI don't indicate error. What is
possible error?
Maybe anyone here can help me.

Thanks a lot
Csaba

7. connect b3 indication ?

8. message numbering in RESPONSEs to INDICATIONs

hello there
im very new to capi programming otherwise i wouldnt ask that question i 
guess..
Well CONFIRMATIONs by the capi always contain the message number of the 
REQUESTs, right? So should i use the INDICATIONs message number when i 
send a RESPONSE? I cannot find anything useful about that in the capi specs.
regards
tobias preclik