nortel >> Help with RSIG error on 61C!!

by allenw » Sat, 18 Sep 2004 03:34:01 GMT

About once a month we get the error message:

XMI0000 4 RSIG link lost on Port #1 - Reinitialized

This repeats about once every 5-10 seconds once it appears.

We disable the controller card, reseat it, and re-enable it and
everything's hunky-dory until the next time (a month or so later).
Does anyone have any idea why this would happen so inconsistently? I
can understand if it happens all the time then the network or
controller card may be bad, but why only every month or so?

This is on a Meridian Option 61C with 25.47 software and NO patches
(yet).

Any help would be appreciated.

Similar Threads

1. Help on error - Disconnect MD110 PABX incoming calls.

Hey Everybody,

I am connecting a BRI GSM GW to MD110 PBX (TLU79 BRI CARD).
When trying to make incoming calls to the PABX I am getting
disconnected.
If the Extension is answering after 5 rings the call is going through
OK.

THE GSM GW is configuered as NT and the PBX as TE.
Any help on what can be done in terms of configuration in the PBX in
order to avoid this situation will be appreciated.

Attach is the Trace Log: (Take a look on frames 12-17)

 Frame : 1   Dir : TE->NT   Date : 2004/06/08   Time : 10:13:58.738  
Length : 12   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	I (Information)
N(S) (Send Sequence Number) : 	0
N(R) (Receive Sequence Number) : 	0
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good
ISDN LAYER 3
Protocol Discriminator : 	0x08
Call Reference Length : 	1
Call Reference Flag : 	Call Origin Side
Call Reference Value : 	0x02
Message Type : 	RELEASE
Cause : 	Normal call clearing
Information Element Identifier : 	CAUSE
Information Element Length : 	 2
Hex. value : 	81 90
Coding stand. : 	CCITT
Location : 	Private/local
Cause Class : 	Normal
 : 	Normal call clearing

Hexadecimal Trace
0000 :  00 01 00 00 08 01 02 4D 08 02 81 90  .......M....


 Frame : 2   Dir : NT->TE   Date : 2004/06/08   Time : 10:13:58.792  
Length : 8   FCS : Good
EDSS-1
Direction : 	NT->TE
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	I (Information)
N(S) (Send Sequence Number) : 	0
N(R) (Receive Sequence Number) : 	1
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good
ISDN LAYER 3
Protocol Discriminator : 	0x08
Call Reference Length : 	1
Call Reference Flag : 	Call Receiver Side
Call Reference Value : 	0x02
Message Type : 	RELEASE COMPLETE
Cause : 	-

Hexadecimal Trace
0000 :  02 01 00 02 08 01 82 5A  .......Z


 Frame : 3   Dir : TE->NT   Date : 2004/06/08   Time : 10:13:58.796  
Length : 4   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Response
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	RR (Receive Ready)
N(R) (Receive Sequence Number) : 	1
Poll/Final : 	Final
Frame Check Sequence (FCS) : 	Good

Hexadecimal Trace
0000 :  02 01 01 02  ....


 Frame : 4   Dir : TE->NT   Date : 2004/06/08   Time : 10:14:08.623  
Length : 4   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	RR (Receive Ready)
N(R) (Receive Sequence Number) : 	1
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good

Hexadecimal Trace
0000 :  00 01 01 03  ....


 Frame : 5   Dir : NT->TE   Date : 2004/06/08   Time : 10:14:08.631  
Length : 4   FCS : Good
EDSS-1
Direction : 	NT->TE
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Response
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	RR (Receive Ready)
N(R) (Receive Sequence Number) : 	1
Poll/Final : 	Final
Frame Check Sequence (FCS) : 	Good

Hexadecimal Trace
0000 :  00 01 01 03  ....


 Frame : 6   Dir : TE->NT   Date : 2004/06/08   Time : 10:14:11.788  
Length : 38   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	I (Information)
N(S) (Send Sequence Number) : 	1
N(R) (Receive Sequence Number) : 	1
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good
ISDN LAYER 3
Protocol Discriminator : 	0x08
Call Reference Length : 	1
Call Reference Flag : 	Call Origin Side
Call Reference Value : 	0x02
Message Type : 	SETUP
Cause : 	-
Information Element Identifier (Single Byte) : 	SEND.COMPLETE
Information Element Identifier : 	BEARER CAPABIL
Information Element Length : 	 3
Hex. value : 	90 90 A3
Coding stand. : 	CCITT coding
Info tr.capab : 	3.1 kHz audio
Transfer mode : 	Circuit mode
Info tr.rate : 	64 kbit/s
 : 	Layer 1 ident.
User info l-1 : 	Rec.G.711 Alaw
Information Element Identifier : 	CHANNEL IDENT.
Information Element Length : 	 1
Hex. value : 	89
Chan. select. : 	B1 channel
 : 	Exclusive
 : 	Not D-channel
 : 	Int.implicitly
Information Element Identifier : 	CALLING PTY NB.
Information Element Length : 	 12
Hex. value : 	00 80 30 39 34
 : 	31 33 30 35 33 36 39
Type of numb. : 	Unknown
Number. plan : 	Unknown
Present.indic : 	Allowed
Screening ind : 	U.prov.nt.scre
No.digits/IA5 : 	0941305369
Information Element Identifier : 	CALLED PARTY NB
Information Element Length : 	 5
Hex. value : 	80 32 30 30 30
Type of numb. : 	Unknown
Number. plan : 	Unknown
No.digit/IA-5 : 	2000

Hexadecimal Trace
0000 :  00 01 02 02 08 01 02 05 A1 04 03 90 90 A3 18 01 
................
0010 :  89 6C 0C 00 80 30 39 34 31 33 30 35 33 36 39 70 
.l...0941305369p
0020 :  05 80 32 30 30 30  ..2000


 Frame : 7   Dir : NT->TE   Date : 2004/06/08   Time : 10:14:11.855  
Length : 11   FCS : Good
EDSS-1
Direction : 	NT->TE
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	I (Information)
N(S) (Send Sequence Number) : 	1
N(R) (Receive Sequence Number) : 	2
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good
ISDN LAYER 3
Protocol Discriminator : 	0x08
Call Reference Length : 	1
Call Reference Flag : 	Call Receiver Side
Call Reference Value : 	0x02
Message Type : 	CALL PROCEEDING
Cause : 	-
Information Element Identifier : 	CHANNEL IDENT.
Information Element Length : 	 1
Hex. value : 	89
Chan. select. : 	B1 channel
 : 	Exclusive
 : 	Not D-channel
 : 	Int.implicitly

Hexadecimal Trace
0000 :  02 01 02 04 08 01 82 02 18 01 89  ...........


 Frame : 8   Dir : TE->NT   Date : 2004/06/08   Time : 10:14:11.859  
Length : 4   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Response
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	RR (Receive Ready)
N(R) (Receive Sequence Number) : 	2
Poll/Final : 	Final
Frame Check Sequence (FCS) : 	Good

Hexadecimal Trace
0000 :  02 01 01 04  ....


 Frame : 9   Dir : NT->TE   Date : 2004/06/08   Time : 10:14:11.995  
Length : 16   FCS : Good
EDSS-1
Direction : 	NT->TE
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	I (Information)
N(S) (Send Sequence Number) : 	2
N(R) (Receive Sequence Number) : 	2
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good
ISDN LAYER 3
Protocol Discriminator : 	0x08
Call Reference Length : 	1
Call Reference Flag : 	Call Receiver Side
Call Reference Value : 	0x02
Message Type : 	ALERTING
Cause : 	-
Information Element Identifier : 	PROGRESS INDIC.
Information Element Length : 	 2
Hex. value : 	81 88
Coding stand. : 	CCITT
Location : 	Priv.net.s.loc
Progress desc : 	 In-band info or patt. avail.
Information Element Identifier : 	PROGRESS INDIC.
Information Element Length : 	 2
Hex. value : 	81 82
Coding stand. : 	CCITT
Location : 	Priv.net.s.loc
Progress desc : 	 Destination addr. is non-ISDN

Hexadecimal Trace
0000 :  02 01 04 04 08 01 82 01 1E 02 81 88 1E 02 81 82 
................


 Frame : 10   Dir : TE->NT   Date : 2004/06/08   Time : 10:14:11.998  
Length : 4   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Response
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	RR (Receive Ready)
N(R) (Receive Sequence Number) : 	3
Poll/Final : 	Final
Frame Check Sequence (FCS) : 	Good

Hexadecimal Trace
0000 :  02 01 01 06  ....


 Frame : 11   Dir : NT->TE   Date : 2004/06/08   Time : 10:14:13.819  
Length : 20   FCS : Good
EDSS-1
Direction : 	NT->TE
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	I (Information)
N(S) (Send Sequence Number) : 	3
N(R) (Receive Sequence Number) : 	2
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good
ISDN LAYER 3
Protocol Discriminator : 	0x08
Call Reference Length : 	1
Call Reference Flag : 	Call Receiver Side
Call Reference Value : 	0x02
Message Type : 	CONNECT
Cause : 	-
Information Element Identifier : 	PROGRESS INDIC.
Information Element Length : 	 2
Hex. value : 	81 82
Coding stand. : 	CCITT
Location : 	Priv.net.s.loc
Progress desc : 	 Destination addr. is non-ISDN
Information Element Identifier : 	CONNECTED NUMB
Information Element Length : 	 6
Hex. value : 	01 81 32 30 30
 : 	30
Type of numb. : 	Unknown
Number. plan : 	ISDN/tel./E164
Present.indic : 	Allowed
Screening ind : 	U.prov.ver.psd
No.digits/IA5 : 	2000

Hexadecimal Trace
0000 :  02 01 06 04 08 01 82 07 1E 02 81 82 4C 06 01 81 
............L...
0010 :  32 30 30 30  2000


 Frame : 12   Dir : TE->NT   Date : 2004/06/08   Time : 10:14:13.821  
Length : 4   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Response
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	RR (Receive Ready)
N(R) (Receive Sequence Number) : 	4
Poll/Final : 	Final
Frame Check Sequence (FCS) : 	Good

Hexadecimal Trace
0000 :  02 01 01 08  ....


 Frame : 13   Dir : TE->NT   Date : 2004/06/08   Time : 10:14:13.828  
Length : 11   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	I (Information)
N(S) (Send Sequence Number) : 	1
N(R) (Receive Sequence Number) : 	4
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good
ISDN LAYER 3
Protocol Discriminator : 	0x08
Call Reference Length : 	1
Call Reference Flag : 	Call Origin Side
Call Reference Value : 	0x02
Message Type : 	CONNECT ACKNOWLEDGE
Cause : 	-
Information Element Identifier : 	CHANNEL IDENT.
Information Element Length : 	 1
Hex. value : 	89
Chan. select. : 	B1 channel
 : 	Exclusive
 : 	Not D-channel
 : 	Int.implicitly

Hexadecimal Trace
0000 :  00 01 02 08 08 01 02 0F 18 01 89  ...........


 Frame : 14   Dir : NT->TE   Date : 2004/06/08   Time : 10:14:13.836  
Length : 4   FCS : Good
EDSS-1
Direction : 	NT->TE
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Response
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	REJ (Reject)
N(R) (Receive Sequence Number) : 	2
Poll/Final : 	Final
Frame Check Sequence (FCS) : 	Good

Hexadecimal Trace
0000 :  00 01 09 04  ....


 Frame : 15   Dir : TE->NT   Date : 2004/06/08   Time : 10:14:15.588  
Length : 3   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	SABME (Set Asynchronous Balanced Mode Extended)
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good

Hexadecimal Trace
0000 :  00 01 7F  ..


 Frame : 16   Dir : NT->TE   Date : 2004/06/08   Time : 10:14:15.596  
Length : 3   FCS : Good
EDSS-1
Direction : 	NT->TE
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Response
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	UA (Unnumbered Acknowledgement)
Poll/Final : 	Final
Frame Check Sequence (FCS) : 	Good

Hexadecimal Trace
0000 :  00 01 73  ..s


 Frame : 17   Dir : NT->TE   Date : 2004/06/08   Time : 10:14:18.026  
Length : 15   FCS : Good
EDSS-1
Direction : 	NT->TE
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	I (Information)
N(S) (Send Sequence Number) : 	0
N(R) (Receive Sequence Number) : 	0
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good
ISDN LAYER 3
Protocol Discriminator : 	0x08
Call Reference Length : 	1
Call Reference Flag : 	Call Receiver Side
Call Reference Value : 	0x02
Message Type : 	DISCONNECT
Cause : 	Protocol error
Information Element Identifier : 	CAUSE
Information Element Length : 	 5
Hex. value : 	81 E6 33 31 33
Coding stand. : 	CCITT
Location : 	Private/local
Cause Class : 	Protocol error
 : 	Recovery on timer expiry
Timer/IA-5 : 	313

Hexadecimal Trace
0000 :  02 01 00 00 08 01 82 45 08 05 81 E6 33 31 33  .......E....313


 Frame : 18   Dir : TE->NT   Date : 2004/06/08   Time : 10:14:18.030  
Length : 4   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Response
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	RR (Receive Ready)
N(R) (Receive Sequence Number) : 	1
Poll/Final : 	Final
Frame Check Sequence (FCS) : 	Good

Hexadecimal Trace
0000 :  02 01 01 02  ....


 Frame : 19   Dir : TE->NT   Date : 2004/06/08   Time : 10:14:19.007  
Length : 8   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	I (Information)
N(S) (Send Sequence Number) : 	0
N(R) (Receive Sequence Number) : 	1
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good
ISDN LAYER 3
Protocol Discriminator : 	0x08
Call Reference Length : 	1
Call Reference Flag : 	Call Origin Side
Call Reference Value : 	0x02
Message Type : 	RELEASE
Cause : 	-

Hexadecimal Trace
0000 :  00 01 00 02 08 01 02 4D  .......M


 Frame : 20   Dir : NT->TE   Date : 2004/06/08   Time : 10:14:19.041  
Length : 8   FCS : Good
EDSS-1
Direction : 	NT->TE
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Command
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	I (Information)
N(S) (Send Sequence Number) : 	1
N(R) (Receive Sequence Number) : 	1
Poll/Final : 	Poll
Frame Check Sequence (FCS) : 	Good
ISDN LAYER 3
Protocol Discriminator : 	0x08
Call Reference Length : 	1
Call Reference Flag : 	Call Receiver Side
Call Reference Value : 	0x02
Message Type : 	RELEASE COMPLETE
Cause : 	-

Hexadecimal Trace
0000 :  02 01 02 02 08 01 82 5A  .......Z


 Frame : 21   Dir : TE->NT   Date : 2004/06/08   Time : 10:14:19.045  
Length : 4   FCS : Good
EDSS-1
Direction : 	TE->NT
Decode Status : 	-
ISDN LAYER 2
ADDRESS FIELD:
SAPI (Service Access Point Identifier) : 	0
Command/Response : 	Response
Extension Bit 1 : 	0
TEI (Terminal Endpoint Identifier) : 	0
Extension Bit 2 : 	1
CONTROL FIELD:
Type : 	RR (Receive Ready)
N(R) (Receive Sequence Number) : 	2
Poll/Final : 	Final
Frame Check Sequence (FCS) : 	Good

Hexadecimal Trace
0000 :  02 01 01 04  ....

2. Help On Error - Ericsson BusinessPhone PBX.

3. Cable Modem Error Messages - Help

4. Cisco 827H Error message: Please help

5. need help with PIX 506-501 VPN error

I have a 506e running several tunnels to a number of 501's.  I tried to add
a new 501 but, try as I can, I can't seem to build the new tunnel.  I am
using script exactly the same as the other units but I continually get the
MM_KEY_EXCH error on both units.  It remains for a minute or two and then
deletes itself.

Obvisouly the two units are communicating but can't seem to complete the
tunnel (phase 2?).

We have redone the ISAKMP key many times.  And have run out of ideas.  What
usually causes this kind of problem?  I would really appreciate suggestions
where I can go from here?





6. Pls Help Diagnose Router Errors

7. Error squeezing flash: Help

Hi,

I just upgraded flash: memory from 12 to 24 Mb in my Cisco 837 router. 
All went well, exept the following:

When I try to squeeze flash memory I get the error massage:

"%Error squeezing flash (Missing or corrupted log)"

And nothing is squeezed (reloading/restarting the router doesn't help).


I can't find any pointers to this problem (only 1 in Russsian...)

Here is a short listing:

!-------------
Cisco837#show flash:

System flash directory:
File  Length   Name/status
  1   6819336  c837-k9o3sy6-mz.123-2.XC2.bin [deleted]
  2   8187316  c837-k9o3sy6-mz.123-8.T3.bin
  3   3883008  sdm.tar
(...)
[20445228 bytes used, 4720592 available, 25165820 total]
24576K bytes of processor board System flash (Read/Write)

Cisco837#squeeze flash:
Squeeze operation may take a while. Continue? [confirm]
First create squeeze log by erasing the entire device

%Error squeezing flash (Missing or corrupted log)
Cisco837#
!-------------

Anyone a suggestion?

Thanks in advance,
atcat


8. Troubleshooting errors on 2950G interface, need help