solidworks, Advanced Tip of the Day: Uninstalling SW completely

1. TIP OF THE DAY: Inteligent cleaning of SW Backups

2. SW Tip of the day: clean out your pc

3. SW World 2007 Day 3 Morning (and Day 2 PM & Event)

Well three days have come and gone  like it was one.  I discovered
last
year that with all the information that available here, the days tend
to run into eachother, and it makes it feel like one fun day.

But lets go back and wrap up day 2, and the offsite event.  Like every
other day here the after noon was filled with three great sessions.
The most informative for me was a 3-D Sketching made easy.  I had very
little knowledge of 3-D sketching, and rarely used it.  The
presentation was excellent.  I walked away feeling that I can now
utilise this tool when I need too.  My biggest complaint was that it
was only an hour long session.

The day wrapped up with a conga line of busses parked out in front of
the convention center.  There were a total of 60+ busses that were
said to be dedicated to moving SW World Attendes to the offsite
event.  At about 55 passengers each bus, thats 2400+ people.  Mardi
Gras World is an intresting place.  Its a place where they build mardi
gras floats.  It was neat to see them up close.  In true SW World
fashion, there was plenty of beer, wine, and mixed drinks to go around
for everyone.  All in all, and grat event, and I cant wait to see how
they top it next year.

So the Day 3 general session started out with the mad dash from the
doors to the seats.  But what im sure is to to the open bar at the
offsite event, the crowd seemesd to be a tad bit smaller.

The session began like the past two days with the introductory video,
and Jeff Ray took the stage.  He spoke about the events of the past
few days, and almost immediatly introduced the product development
team to preview SW 2008 for every one.

On stage was what looked like a set from Star Trek.  Som in a Star
Trek show like production, the presentation began.  So here is a list
in the best way I can descripe it without being here:

1.  Fast Preview-
     They opened a 2000 part assembly on the screen.  Graphically all
the parts were there, but it only took 5 seconds to do.  In the
feature tree, none of the items had been fully loaded, but they were
there on the screen, and you could show or hide them.  Once they
picked out certain items, they finished opening the assembly, but only
those parts shown were there.  So its a tool to aid in the opening of
large assembly files.  The same file takes over a minute to load in
2007.

2.  Hole Alignment Check-
     They showed a model of a tape gun that is used to tape shut
boxes.  They mated a support arm that had three holes.  They mated two
of them to the body, and you could obviously see that the third was
misalligned.  They activated the Hole Alignment Check tool, and SW
found the hole, showed the dimension that was wrong, and gave them the
chance to change it.  Its a tool that will help to validate the design
of an assembly before it is approved.

3.  Group Filletts-
     Building on the success of the SWIFT technology, the fillett
command is once again getting more abilities.  You can now copy and
past filletts from edges to edges, when you fillett a corner, and it
wraps up onto an edge, you can you have the option to select how it
looks from graphical icons that show up.  Filletts have long been a
feature that has been very difficult for people to understand, and
this makes it one step easier to making it simple.

4.  Auto Tolerancing DIMXPERT-
     The "XPERT" series in 2008 expands into toleranching.  By
selecting a few faces, SW is now able to auto dimension, and auot
tolerance a part, and then place those callouts into a drawing for the
user.

5.  BOM Help-
     BOM sees like its the area that got the biggest upgrade of all.
I personally am excited by some of the stuff I saw.  When you have a
BOM, and you edit one of the cells, that will now automatically also
edit and update the coresponding custom property in the part file.
The BOM table continues to act more and more like a true Excel
spreadsheet.  You can drag and move rows and collums, along with
easier placement.

6.  Drawing Items-
     When you create a note, and you want it to reference a balloon,
while in the note, you simply click a balloon, and that balloon
appears in your note box.  Text boxes now behave like a picture with
drag and resizing handles on a pictur file.  Have a note that hangs
out of a box?  All you do is grab the edge, and drage it down to size
without having to adjust font size.  You will also be able to copy and
paste drawings in a multi sheet drawing.

7.  Direct Editing-
     Probably the biggest hit is the Direct editing.  Imagine you have
a fillet on a part, and you wanna change it.  Now all you have to do
is click on the surface, and a drag handle appears, and you can drag
it to size.  This was shown to work on bosses, cuts, everything you
would normally want to change.  Its an exciting tool that has lots of
potential.  What was even better, they were doing it on an imported
solid!

8.  Mechanical Mates-
     New mates include: Screw Mates, Linear Coupling, and Path Mates.
You can also replicate parts in an assembly, and SW will automatically
identify the mates needed, and create them for you.

9.  New add-ins-
     Driveworks Xpress will now be included with basic SW as well as
Flow Works Xpress.

So along with a bunch of other little tidbits, the sneak peak was a
great success.  I would incourage you to brows some of the SW blogs as
im sure there will be lots of info there too.

So what about SW World 2008??  Well it wasnt a very well kept secret,
by Monday afternoon, the word was spreading fast, but in an effort to
not spoil it for anyone here, I kept it to myself untill now.  So make
you plans now, and leave the jackets at homw, SW World 2008 is heading
out west to San Diego Jan 20-24 2008.  For me that means I can drive
instead of fly, and I will be somewhat familiar of where I am.

So im off to lunch, then the last two sessions for this year :(  Look
for my wrap-up post later on tonight along with the list of top 10
enhancement requests from this year.

Thanks for following along.

4. Animator Tip: Splitting Recording Time Into Multiple Days

5. TIP OF THE DAY: Possible crash cause

6. API:TIP OF THE DAY

7. TIP OF THE DAY: Bifurcation in assembly mates

This is one most people have experienced but didn't know what to call
it.

When using cam mates it is possible have two solutions to the mate when
a dimension driving the cam mate changes. For example, imagine that the
cam track consists of an equilateral triangle with rounded vertices. A
part is driven around the track by a distance mate from one of the
vertices to a point mated to the track. As the distance mate is changed
the point will move away from the vertex assuming the mate dimension is
being increased. The driven point will eventuall reach the next vertex.
At some point it will move arount the adjacent vertex and end up on the
base of the equilateral triangle opposite the driving vertex. At this
point there will be two solutions for the distance mate. If you are
jumping from a previous configuration along one of the sides of the
triangle adjacent to the vertex the point will pick the solution that
is closer to last position in the previous configuration.

To avoid this it is important to approach a location capable of
bifurcation in small steps.

8. Tip of the Day