ISA Clients, accessing newsgroups with firewall client

1. Client Web access, POP3, HTTP, Newsgroups

I have installed the ISA 2000, which is part of my SBS 2000.e   When
installed it I did have access to the web for the server as well as the
client, I did not even have to install any software (Firewall client or NAT
client) on the client side.  However, I was not able to have POP3 email as
well as access to the news group, which I believe requires HTTP to
activated.

So, I changed multiple settings. After the changes, I lost access to the web
for the server as well as the client.

In order to corect this, I ran the wizards again on the ISA server, which I
think reset all the settings.  Immediately, I had web access for the server
only.  None of the clients have access.

My question is, How can I get web access for the client and allow POP3,
since I am hosting my web external as well as allow HTTP.

My network environment, I have a server with two NICs  One for external, one
for internal.  The external is connected directly to the router.

The first NIC, which is the internal is through my DHCP 10.100.0.x
The second NIC, is 192.168.1.x and the router IP 192.168.1.x

I already specified the DHCP through ISA.
The ISA is running in an integrated mode.

In reference to installing the client software on the client machines, I do
have some questions:
    Which one I should choose (SecureNAT or FireWall client)?
    Whatever client would be recommended, would it effect any client that
access the internet without being connected to the server (mobile client
with laptops)?

Any ideas or solutions, would be appreciated.  If you need any further
information, please ask in simple terms as I am still a novice on ISA
terminology.  Thank you...

2. Client Web Access, Newsgroups, Http, Pop3 - ISA Server

3. FTP client access issues using firewall client

W2k3, ISA 2004, Clients are using the Firewall client.

Clients are unable to access FTP sites.  When using ftp.exe the connection 
times out.

I have a firewall policy access rule called "FTP Cient access" which is set 
to allow the default FTP protocol from all protected networks to external 
network for all users.  I have tried filtered and un-filtered and i know 
about the Read only setting, but it makes no difference because i cannot 
connect.

I can connect from the ISA server with no problems.

Any assistance you can give would be great!

Thanks,
Steve

4. Firewall CLient FTP Access on Back-to-Back DMZ Configuration

5. Allowing one PC Client direct access - no proxy/no firewall - allowing uPnP

SBS2K3 ISA 2000.

Is there a way to allow one client PC access to the internet (and MSN
Messenger etc...) without using the proxy?

I have one PC that must use MSN
Messenger Video conferencing 3-4 times a week.  I would love the rest of the
PC's to be using ISA however.

Thanks

JS

-- 
sdhi@please dont spam me.rogers.com 

6. Firewall Client on Server blocking access form workstations? - ISA Clients

7. securenat and firewall clients no internet access

Hi,

today i installed isa2004 on a multihomed sbs2k3 sp2 server
this server has 2 nics
i installed sp3 
however clients are only able to browse the internet through use of the 
proxy server
i searched the kb but the hotfix described is older then the sp3
assuming this hotfix is in sp3, what now?

thanks for any help

best regards,

roy

8. prevent firewall client access to web - ISA Configuration