winsock, Error installing Indy 9.00.14

borland.public.delphi.internet.winsock -


winsock >> Error installing Indy 9.00.14

by Danny Heijl » Wed, 23 Jul 2003 15:26:00 GMT

Ignore the bat files.

Go to the Packages directory, open the D5 runtime package, build it, open
the D5 design package, buildit, and install.

Go to Tools/Environment/Library path and add the Indy directory to the
library search path.

That should be all that is needed, and it takes less than a minute (if you
have done it before).

Danny
---

"Doug Munday" < XXXX@XXXXX.COM > schreef in bericht
news:3f1dce4c$ XXXX@XXXXX.COM ...
> I am having more problems upgrading Indy to 9.0.14 to my Delphi 5
Enterprise
> machine. When I try to install the bpl, I get an error that File not
found:
> "IdRegister.dcu". Yes, I ran the fulld5.bat before installing. There is
a
> IdRegister.pas file in the Indy\source folder, but no IdRegister.dcu in
the
> Indy\D5 folder. There is no dpk to recompile the dcu's...? Also, I
thought
> maybe there was something wrong with my Delphi install, so I tried
> installing Indy 9.0.14 to another machine with Delphi 5 Enterprise, and
the
> same exact thing happened.
>
> Thanks for any help.
>
> Doug
>
>



Top

winsock >> Error installing Indy 9.00.14

by Doug Munday » Thu, 24 Jul 2003 02:20:54 GMT


Thanks for the help, but I am still stuck. I am not clear on your
instructions. If I am to ignore the .bat file, and presumably start the
installation over again, there is no D5 folder. What do you mean by
"Pagkages directory"? Do you mean the "...\source" folder? What specific
file do you mean by "D5 runtime package" (my guess would be the .bpl file,
but it does not exist if I have not run the bat file) and what file do you
mean by "D5 design package"?

Thanks!




is




Top

winsock >> Error installing Indy 9.00.14

by Doug Munday » Thu, 24 Jul 2003 03:57:14 GMT

That did it. Thanks for the help!

Doug



specific
file,
you



Top
Similar Threads

1. AV in TIdMessage, Indy 9.00.14 and Delphi 7

2. updating from 9.00.12 to 9.00.14 on Kylix 3

3. DHCP Server Leasing Addresses to MAC Addresses of 00-00-00-00-00-00

4. can't connect ubuntu wifi Access Point: 00:00:00:00:00:00 

hi,

i got a laptop with ubuntu installed with kernel 2.6.10
i got edimax wireless usb stick with zd1211 chipset
i install the driver for it from zd1211.ath.cx and the driver shows in
lsmod.
i configured it using iwconfig and brought it up using ifconfig wlan0
up.

the interface it showing as up but the "Access Point" show
00:00:00:00:00:00
and ofcourse i cannot connect and cannot obtain an ip from my dhcp
router.

(ofcourse the usb is working from the same computer from the same usb
port when booting windows)

help!!!!
any ideas????

here are some output/logs....
$iwconfig
wlan0     802.11b/g NIC  ESSID:"perlaNet"
          Mode:Managed  Frequency=2.442 GHz  Access Point:
00:00:00:00:00:00
          Bit Rate:1 Mb/s
          Retry:off   RTS thr=2432 B   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=28/100  Signal level=64/100  Noise level=0/100
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:10

$ifconfig
wlan0     Link encap:Ethernet  HWaddr 00:0E:2E:5D:B7:6B
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:10 dropped:0 overruns:0 frame:10
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
        Tx excessive retries:1823  Invalid misc:0   Missed beacon:0

$lsmod
zd1211                256236  0
usbcore               107512  4 zd1211,ehci_hcd,uhci_hcd

$lsusb -v -s 003:003

Bus 003 Device 003: ID 0ace:1211
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  idVendor           0x0ace
  idProduct          0x1211
  bcdDevice           48.10
  iManufacturer          16 ZyDAS
  iProduct               32 USB2.0 WLAN


thanks,
Meni

5. My MAC address is 00-00-00-00-00-00

6. I am having problems with installing Indy 9.0.14 

I am using Delphi 6 Ent with Update 2 and RTL update.

I downloaded Indy 9.0.14 and deleted all regular Indy stuff that ships with
Delphi.

I open the dpks and compile them and everything goes fine however when I try
installing the design time package I get the following error:
"Can't load packase ...\dclIndy60.bpl.  The specified procedure
could not be found"

Thanks

7. Question about "EIdProtocolReplyError: Cannot route to" error [Indy 9.00.10]

8. fechas oracle '00/00/00' 

Al grabar una fecha como NULL contra una Base de Datos ORACLE.
Muy ocasionalmente la graba como '00/00/00', lo que da error al leer el
registro correspondiente.

Alguien sabe como solucionar el problema.
Muchas gracias.

JAS