2. Static FM Radio using ivtv-radio on Hauppauge PVR-350
hey all, When I try to play radio with ivtv-radio I only get static. (Scanning for channels / frequencies finds nothing) I have a Hauppauge PVR-350 running Fedora Core 4 and have ivtv-0.4.0-98.rhfc4.at installed. I have tried the card on a windows box and the radio works perfectly there. (TV works perfectly on both systems) Below shows some output and messages in dmesg Any ideas? Thanks! > > ivtv-radio -s > > ivtv-radio -a > > ivtv-radio -f 96.9 set to freq 96.88 Running: aplay -f dat < /dev/video24 Playing raw data 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo ^C Aborted by signal Interrupt... Cleaning up >ivtv-radio -f 104.1 set to freq 104.12 Running: aplay -f dat < /dev/video24 Playing raw data 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo ^C Aborted by signal Interrupt... Cleaning up > > dmesg | grep -i ivtv ivtv: no version for "struct_module" found: kernel tainted. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.14-1.1644_FC4smp SMP 686 REGPARM 4KSTACKS gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 350 card (iTVC15 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom: ivtv version ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] msp34xx: ivtv version ivtv0: i2c attach to card #0 ok [client=MSP3448W-A2, addr=40] ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: loading /lib/modules/ivtv-fw-dec.bin ivtv0: Encoder revision: 0x02040024 ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032. ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) ivtv0: loading /lib/modules/ivtv_init_mpeg.bin ivtv0: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ====================
3. [PATCH 2/4] media-radio: Maestro radio Lindent - Linux
4. [PATCH 1/4] media-radio: Pci probing for maestro radio
5. [patch 04/14] radio/radio-aimslab: replace while/schedule() with msleep() - Linux
6. [patch 05/14] radio/radio-cadet: replace schedule_timeout() with msleep()
7. [patch 06/14] radio/radio-maestro: replace schedule_timeout() with msleep() - Linux
8. [patch 09/14] radio/radio-sf16fmi: replace schedule_timeout() with msleep()