Embedded Linux, Billionton CF ethernet card

comp.os.linux.embedded - Linux operating system on embedded hardware.


Embedded Linux >> Billionton CF ethernet card

by David Peters » Fri, 03 Dec 2004 03:07:17 GMT

I'm trying to use a Billionton 10base ethernet CF card on an AT91RM9200
running 2.4.27-vrs1. When the card is inserted, it seems to get hung up on:
write_cis_mem(s, 1, (base+CISREG_COR)>>1, 1, &c->Option);
in function pcmcia_request_configuration in cs.c. I've been using 802.11 CF
cards in the port and haven't had any problems with them, so I'm pretty
confident that the port is working properly.
Any help would be appreciated. Thank you!!



Top
Similar Threads

1. Billionton bluetooth CF card: performance is 10KB/sec - Linux

2. Billionton bluetooth CF card: performance is 10KB/sec (fwd)

3. Billionton bluetooth CF: how to make it work - Linux

4. laptop Q re ethernet card / pcmcia card? 

Running SUSA Linux 10 on Acer Aspire 3610 laptop.  It may be that
the Ethernet card is not supported but can I use a pcmcia Linux
supported ethernet card to get around the internal ethernet card not
being supported.

5. HD + cf-card: can I force the HD to be /dev/hdb in absence of the cf-card - Linux Setup

6. CF card interface for MCF5282 under uCLinux 

Hi there

Does the uCLinux port for the Coldfire MCF5282 include a CF card
driver? And if yes, which card mode(s) does it support (Memory Mode,
I/O Mode or True IDE Mode)?

Or is there any other OS for the MCF5282 which supports CF cards?

Thanks!

Daniel
 XXXX@XXXXX.COM