Windows Server >> error 1053 and 2019

by dG90b21hc3Rlcg » Tue, 22 Mar 2005 22:01:03 GMT

Hi

On one of my Windows 2003 server I have those error:

Event Type: Error
Event Source: Srv
Event Category: None
Event ID: 2019
Date: 3/21/2005
Time: 4:22:06 AM
User: N/A
Computer: WINDEVSRV
Description:
The server was unable to allocate from the system nonpaged pool because the
pool was empty.


Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1053
Date: 3/21/2005
Time: 3:56:03 AM
User: NT AUTHORITY\SYSTEM
Computer: WINDEVSRV
Description:
Windows cannot determine the user or computer name. (Not enough storage is
available to complete this operation. ). Group Policy processing aborted.

Every time I see those error, the server crashed few hours after. This
server has only a programmation software and a Mcafee Enterprise installed
and nothing else.

I want to know why I have those errors ?

Thanks






Windows Server >> error 1053 and 2019

by arno » Tue, 22 Mar 2005 22:22:25 GMT


Hi totomaster,

look at
http://www.eventid.net/search.asp

you need:


arno



Windows Server >> error 1053 and 2019

by arno » Tue, 22 Mar 2005 22:27:51 GMT

PS:


will bring up a page and then you click on the link like the one below,
there is your solution.

Details Comments and links for event id 2019 from source Srv

arno



RE: error 1053 and 2019

by v-rebc » Wed, 23 Mar 2005 07:30:12 GMT

ello,

Based on my research, please see my inline:

1. Event ID 2019
=================
In most cases, Event ID 2019 is related to anti-virus installed on your
system, the system cannot allocate the non-paged pool for use due to the
anti-virus has exhausted it. I suggest you remove the anti-virus from the
system to check the status.

For more details, please refer to the following article:

272568 Event ID 2019 or 2020 or "Insufficient System Resources" error
returned
http://support.microsoft.com/?id=272568

2. Event ID 1053
================= This Event could occur by several causes:

A: This error typically indicates a handle or thread leak.
Please observe if the issue disappears after removing the anti-virus; on
other hand, what kind of program software is installed on the system?

Please refer to the following article to download and run pstat.exe on the
server, which one has used an excessive amount of Handles? You can issue
the command "pstat.exe > c:\test.txt" and send c:\test.txt to
XXXX@XXXXX.COM research.
Pstat.exe: Process and Thread Status
http://www.microsoft.com/windows2000/techinfo/reskit/tools/existing/pstat-o.
asp

we can find which one used too many handles from the pstat result.

B. Please check if the following article has addressed the same scenario as
you have encountered, if you allow the win2k3 server to be a terminal
server, you may get Event ID 1053 in the Event Log:

User Cannot Create a Terminal Server Roaming Profile Path If a User with
the Same Name Has Logged On from Another Domain
<http://support.microsoft.com/?id=821929>

If this is the case, you need to contact our phone support engineer to get
the hotfix, please also to add following registry key and reboot the server
afterward.

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server]

IgnoreRegUserConfigErrors =dword:1

WARNING: Using Registry Editor incorrectly can cause serious problems that
may require you to reinstall Windows. Microsoft cannot guarantee that
problems resulting from the incorrect use of Registry Editor can be solved.
Use Registry Editor at your own risk.

You can also use a tool called UPHclean.exe to clear the user profile :

User Profile Hive Cleanup Service
http://www.microsoft.com/downloads/details.aspx?FamilyID=1b286e6d-8912-4e18-
b570-42470e2f3582&displaylang=en


C: If the issue occurs when a user try to remotely manage a machine using
Computer Management, or anything that requires authentication, please check
the if the user in too many groups. For example, domain\user1 account is in
many groups, he may encounter this error when this user remote to the
server.

If this is the case, you may try changing the maxtokensize on the affected
accounts per the KB article:

280830 Kerberos Authentication May Not Work If User Is a Member of Many
Groups
http://support.microsoft.com/?kbid=280830

In addition, Eventid.net is a very good resource as Arno has pointed out.

Any update, let us get in touch!

Best regards,

Rebecca Chen

MCSE2000 MCDBA CCNA


Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security

=====================================================

When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.

=====================================================
This posting is provided "AS IS" with

RE: error 1053 and 2019

by v-rebc » Tue, 29 Mar 2005 11:13:46 GMT

Hi Francois,

Based on my research on test.txt, I have found the MacAfee and IIS Admin
Service Helper have occupied many memories:

Please see the following list:
NOTE: the application name is based on my research, it is might not be the
exact application name.

Process name memory application

EnvoiFactureServeur.exe 11516 N/A

omaws32.exe 25000 Dell open manager

mcshield.exe 26076 MacAfee Internet Security suite.

inetinfo.exe 30584 IIS Admin Service Helper

inetinfo.exe is used primarily for debugging Microsoft Windows Server
Internet Information Services. This program is important for the stable and
secure running of your computer and should not be terminated.

EnvoiFactureServeur.exe and omaws32.exe, frankly, they are third-party
application which I am not very familiar with. Probably, you have a more
concern idea about these applications and can make a judgment.

The following is MacAfee Internet Security suite, I suggest you remove
MacAfee Internet Security suite to check the status.

Any update, let us get in touch!

Best regards,

Rebecca Chen

MCSE2000 MCDBA CCNA


Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security

=====================================================

When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.

=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.

For other readers, Francois has emailed me the test.txt via email, for
privacy reason, I have not posted in the public. Thanks!



RE: error 1053 and 2019

by dG90b21hc3Rlcg » Tue, 29 Mar 2005 14:17:03 GMT

Thanks Rebecca





RE: error 1053 and 2019

by v-rebc » Tue, 29 Mar 2005 15:05:35 GMT

Hi Francois,

I have received the MPSreport, I have found the following infomraiton from
the system log:
Event ID 2013
Data 3/26/2005
The C: disk is at or near capacity. You may need to delete some files.

This message indicated that your C drive is out of space, which is the
possible cuase for Event ID 1053 (Not enough storage is available to
complete this operation. ) in the application log.

Please check your drive C and remove some unused files to release more
spaces since it will cause many problems if the space is not enough on the
system drive. I have found the paging file is located on your C partition,
which is set to C partition space is 9.77 GB, free space is 3.55 GB,
however, your paging file is located on C partition is set to "Total
Virtual Memory 7.85 GB". I suggest you move the paging file to D partition
which has more than 200G space by using the steps below:

1. Right click My Computer to choose Properties
2. Click Advanced->Click Settings button under Performance
3. Click Advanced page and hit the Change button
4. Highlight C partition to choose No paging file, then click Set button
5. Highlight D partition (or other partition), specify the page file size
or choose System manager size, then hit Set button.
6. Restart the machine to take effect.

I believe the suggestions help. Any update, let us get in touch!

Best regards,

Rebecca Chen

MCSE2000 MCDBA CCNA


Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security

=====================================================

When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.

=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.



RE: error 1053 and 2019

by v-rebc » Wed, 30 Mar 2005 09:52:04 GMT

You are welcome!

Futher questions or you have any update, let's get in touch!

Best regards,

Rebecca Chen

MCSE2000 MCDBA CCNA


Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security

=====================================================

When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.

=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.



RE: error 1053 and 2019

by v-rebc » Mon, 04 Apr 2005 09:55:05 GMT

Hi Francois,

I am glad to hear everything is going fine at your end!

If there is anything we can help, please feel free to post in the newsgroup.

Have a nice week!

Best regards,

Rebecca Chen

MCSE2000 MCDBA CCNA


Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security

=====================================================

When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.

=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.



Similar Threads

1. LNK 2001,LNK 1120,LNK 2019 errors. - Windows CE

2. link error 2019

It sounds like you are *declaring* some GUIDs for various things, but never
*defining* them.  This is the same situation you'd have if you declared a
variable in a header file with something like this:

extern int variable;

but forgot to actually define the variable in one of your .cpp files with
something like this:

int variable = 0;

If you are just using some Windows-declared GUID values, you may have to
define a preprocessor symbol to tell the header file that declares them to
define them, also.  This might be INITGUID.  If that's the case, you'd do
something like this in *one* of your .cpp files:

#define    INITGUID
#include <theheaderfile.h>

Paul T.

"Gaurav" < XXXX@XXXXX.COM > wrote in message
news:%23Pz3% XXXX@XXXXX.COM ...
> Hi all,
> While building dll we are getting some linking errors which are as
follows:-
>
> haldd.obj : error LNK2019: unresolved external symbol
> GUID_MiscellaneousCallbacks referenced in function "unsigned long __cdecl
> HalGetDriverInfo(struct _DDHAL_GETDRIVERINFODATA *)"
> (?HalGetDriverInfo@@YAKPAU_DDHAL_GETDRIVERINFODATA@@@Z)
> haldd.obj : error LNK2019: unresolved external symbol
> GUID_ColorControlCallbacks referenced in function "unsigned long __cdecl
> HalGetDriverInfo(struct _DDHAL_GETDRIVERINFODATA *)"
> (?HalGetDriverInfo@@YAKPAU_DDHAL_GETDRIVERINFODATA@@@Z)
> haldd.obj : error LNK2019: unresolved external symbol GUID_KernelCaps
> referenced in function "unsigned long __cdecl HalGetDriverInfo(struct
> _DDHAL_GETDRIVERINFODATA *)"
> (?HalGetDriverInfo@@YAKPAU_DDHAL_GETDRIVERINFODATA@@@Z)
> haldd.obj : error LNK2019: unresolved external symbol GUID_HALMemory
> referenced in function "unsigned long __cdecl HalGetDriverInfo(struct
> _DDHAL_GETDRIVERINFODATA *)"
> (?HalGetDriverInfo@@YAKPAU_DDHAL_GETDRIVERINFODATA@@@Z)
> haldd.obj : error LNK2019: unresolved external symbol GUID_KernelCallbacks
> referenced in function "unsigned long __cdecl
>
> Please help us to sort out this problem.
> Thanks & Regards
> Gaurav khanna
>
>


3. Error : SRV Event ID 2019

4. Srv Errors: 2019 and 2021

Hello,
I've experienced problems with this two errors.
Appears in file servers. It's a cluster connected to a SAN and there are up 
to 900 users working at the same time.
It seems like a server tired after some days working normally. If reboot the 
server it can works without problems at least one week.
It's a Pentium Iv Ram:512 Mb.
I suspect of Outlook. Specifically manage of huge .pst files, about 1 or 2 Gb.
Is there anyone who has experienced problems with that kind of files?
I'm monitoring some counters and this is an example:
At 12:17 problems start
% Disk Time of a volume grows to 800% and 1000%.
Pages/sec grows a lot.
Available Memory goes down.
At 12:24 Srv 2019 and Srv 2021 appears.
PerfDisk 2001 appears and there is no data of % Disk Time in Performance 
Monitor log.
At 12:34 everything go back to normal state. No problems.

Anyone can help?
Thanks in advance,

Juan Carlos Lpez
 XXXX@XXXXX.COM 
CIEMAT

5. Error: 2019 - Windows 2000

6. Error 2019 0n Domain Controller

Hello,
I am getting the following error on one of my domain 
controllers. The DC runs DNS, has McAfee Anti-virus 
installed.

"The server was unable to allocate from the system 
nonpaged pool because the pool was empty."

The DC locks up when the above error happens. The DC runs 
W2K SP4.

Thanks - John

7. Getting a 2019 error message?? - Windows 2000

8. Srv Error Event ID 2019